IgniteNet SunSpot AC1200, Руководство пользователя

Страница: 16 / 67

Chapter 1
| Introduction
Setup Wizard
– 16 –
Step 2
Select Setup Method – Select Easy Setup to set basic wireless network access and
guest network access parameters, or Advanced Setup to specify networking modes
for an AP bridge, AP router, or manual configuration.
Figure 3: Select Setup Method
Step 3
Configure Settings
◆
Easy Setup — Basic wireless network and guest network access parameters.
Specify the name and password for the wireless network and guest network.
The Networking Mode is set to AP Router as described under Advanced Setup .
Figure 4: Easy Setup
■
Wireless Network Setup — Set the name and password for the primary
wireless network. A password must be specified to protect the network
from unauthorized access.