Quick Start
Guide
–
5 –
3.
Connect Cables
Connect Ethernet cable to the 1000BASE-T (
WAN/PoE
) port on the unit.
Connect Category 5e or better cable to the
WAN/PoE
RJ-45 port.
Connect the other end of this cable to a
PoE injector or LAN PoE switch (depending
on AP model).
(Optional) Connect local LAN devices to
any of the other RJ-45 ports on the AP
using Category 5 or better cable.
These 100BASE-TX ports are labeled
LAN1
and
LAN2
.
4.
Connect Power
The AP can be powered either by the AC/DC power adapter provided in the package,
by a PoE power injector (Spark AC750)
Powering the AP with the AC/DC Power Adapter
Connect the cable from the power adapter
to the DC power jack on the AP.
Connect the power adapter to a nearby AC
power source (100-240 VAC, 50/60 Hz).
Powering the AP with a PoE Injector or PoE Switch
Connect Ethernet cable from the
WAN/PoE
port of the AP to a port on the PoE
power source device:
Spark AC750 — a PoE power injector (passive PoE, 24-48 VDC).
switch. Make sure that the PoE power injector or switch is connected to the
LAN.
Note:
Connecting the Ethernet cable from the AP to a PoE injector or PoE switch
powers on the unit.
2
1
1
2
1
1
