Quick Start Guide
– 3 –
8. Complete the Device Configuration
a. Manage the AP with the IgniteNet Cloud Controller
Go to
https://cloud.ignitenet.com
to register your AP. Log in and
select
Devices
from the menu. Click
Add Device
and enter the AP
serial number and MAC address to register the AP with your cloud
network. (The serial number and MAC address can be found on the
product packaging or label.)
b. Manage the AP in Stand-Alone Mode (Optional)
To access the web interface, connect a PC directly to the AP’s
Eth
RJ-
45 port. In a web browser, enter the AP’s default management IP
address of 192.168.1.20 to access the web login page.
If you select to manage the AP in stand-alone mode, use the web
interface to manually make your configuration changes.
For more information on AP configuration in stand-alone mode,
refer to the
HeliOS User Manual
, which can be downloaded from:
https://support.ignitenet.com
Note:
To reset the Bridge AP to factory default settings,
press and hold down the AP’s
Reset
button for 5 seconds. A
quick press of the
Reset
button reboots the AP.
Log in to the web interface
using the default settings:
◆
Login Name — root
◆
Password — admin123
