– 1 –
Q ui c k St a r t G u i d e
1. Unpack and Check Contents
GL-I-1GE-1C
Indoor
GE to G.hn Coax Bridge AP
12 VDC Power Supply
QSG will be posted to the Web
Wall Mounting Kit
2. Mount the Bridge AP
a. Mounting on a Wall
In the required location, mark and drill two holes spaced 57
mm apart in the wall for M4 wall anchors.
Note:
For a wood wall, drilling holes and using wall anchors
is not required.
Mount the unit on the wall and secure it in place using two
M4 x20 tapping screws.
b. Mounting on a Desktop
Attach the included four rubber feet to the base of the
bridge AP and place the bridge AP on the desktop.
2
1
1
2
1
1
1
1
1
3. Connect Power
The bridge AP can receive power from one of two different power
sources:
◆
The supplied DC power adapter to the DC power jack.
◆
Power over Coaxial cable (PoC) to the F-type coaxial connector
(from another IgniteNet GLinq only).
a. DC Power Jack
Plug the DC power supply into a suitable power mains
outlet.
Insert the DC power supply DIN connector into the bridge
AP’s DC power jack.
Note:
When power is supplied to the DC jack and the DC
switch is set to ON, the F-type coaxial connector functions as
a 12 VDC PoC power source.
b. PoC Power
Warning:
Before connecting a coaxial cable
with power to the bridge AP, ensure the PoC DC
switches are in the OFF position on both the PoC
source bridge AP and the PoC receive bridge AP.
Caution:
To prevent damage when physically connecting a
coaxial cable, follow the instructions in step:
7. Connect
Coaxial Cable
Using the DC jack, connect power to the bridge AP that is to
supply coaxial cable power.
On both the power source and receive bridge APs connect a
coaxial cable. Refer to step:
7. Connect Coaxial Cable
of this
guide on how to connect coaxial cable connectors.
2
1
2
2
1
3
1
2
Gigabit Ethernet to Coax bridge
GLinq GL-I-1GE-1C
www.ignitenet.com
