Ignite SA 2100, Быстрый старт

Страница: 5 / 8

SA2100
configuration
CONFIGURING THE SA 2100
The SA 2100 can be configured as the primary or failover connection. You can optimize
the device settings for your application using the SA 2100 Web Interface as described
in “Customize Settings.”
Using the SA 2100 as a failover connection:
The SA 2100 can be configured to perform Network Address Translation
(NAT) or to operate in IP Passthrough mode. If the SA2100 is configured for IP
Passthrough mode, the WAN IP address assigned to the SA 2100 and all traffic
is passed directly through to the connected device attached on the Ethernet
port, such as another router.
The default configuration is NAT. If you are unsure if you need IP Passthrough,
we recommend using the default NAT configuration. IP Passthrough is most
useful in applications where a site-to-site VPN tunnel is required.
Configuring the SA 2100 for Wi-Fi:
The SA 2100 can optionally provide Wi-Fi access. For tablet based Point of Sale
solutions you may elect to simply configure the tablets to connect to the Wi-Fi
network via the SSID and Wi-Fi password printed on the SA 2100 label.