www.ignisproducts.com
Flame Adjustment
Once the flame reaches the entire length of the combustion tray, you may adjust
its intensity at your discretion. Simply press the “UP” arrow on the burner casing
or remote control device for a more intense flame; The “DOWN” arrow for a less
intense flame. The Smart Burner Series is equipped with four (4) intensity levels.
Extinguishing Flame
• To extinguish the flame, simply press the power button on the burner casing or
remote control one time.
• Once power button hgas been pressed, the pump will cease introducing fuel
into the combustion tray.
• As confirmation that the burner has been powered off, the green power button
and arrows will be illuminated.
• The remaining fuel in the combustion tray will burn off. This may take a few
minutes after powering the burner off.
Refilling
Allow the burner to cool down for at least 30 minutes before refilling.
Warning: Never refill the burner when the fireplace is operating or still hot. Never
pour fuel into a burning flame.
Cleaning
1. The burner surface must be cleaned regularly. Use warm water and soap.
2. Check the cover of burner for warping or damage before using.
3. Marks can be best removed with a soft cloth and a mixture of lukewarm water
and a small amount of cleaning liquid (ph-neutral). We recommend cleaning
the stainless steel items regularly to prevent contamination.
CAUTION: Never
use chemical, steel-wool or scrubbing sponges to clean the fire-
place. It can damage the surface.
The manufacturer cannot be held responsible for any damages resulting out of
improper use and/or cleaning of the products.
