background image

6

_

For ovens installed under the worktop, leave a minimum clearance of 5 mm between the upper edge 
of the oven and the lower edge of the worktop (fig. 5). For correct operation of the appliance, this 
clearance must always be unobstructed.

_

If the kitchen unit is not securely fixed to the wall, it must be anchored with standard brackets (A) 
(fig. 6).

Electrical connection

Regulations require that the appliance be earthed.

_

Connection to the mains must be carried out by a qualified electrician in accordance with the 
manufacturer's instructions and in compliance with local regulations.

_

The installer is responsible for connecting appliances correctly to the mains and for observing the safety 
regulations.

_

The oven power cable must be long enough to connect the built-in oven to the mains.

_

Observance of safety directives requires that an accessible mains disconnection device or a multi-pole 
switch with a minimum contact gap of 3mm be used for the installation.

_

Do not use multiple plug adapters or extension leads.

_

After the oven has been installed, the electrical components must be inaccessible.

5

6

Содержание AKL 900













Отзывы: