N
C
M
Y
INSTALLATION
General hints
y
This appliance must be installed by a
competent electrician, with all electrical and
installation requirements prescribed by local
regulations and manufacturer instructions.
y
The furniture in contact with the oven must
be heat- resistant (80
o
C).
y
Remove any packaging material from inside
the oven.
y
Leave the oven to stand on its
polystyrene packaging base to avoid
damaging the oven bottom.
BUILDING-IN
y
Do not lift the oven by the door handle,
but lift it at the sides as illustrated (see
arrow).
y
The oven has been designed for building-in
in a column.
y
The oven and housing dimensions are
illustrated in opposite figure.
y
To ensure a correct ventilation, respect the
ventilation gaps shown in opposite figure.
y
Install the oven in the housing, lifting it at
the sides, taking care not to trap the wires
of the electrical supply cable.
y
Fix the oven to the housing tightening the
screws (E) and (F) as illustrated.
ATTENTION
y
Prior to any intervention, disconnect the oven
from the mains supply.
y
After installation, electric parts must not be
accessible.
A multiple circuit breaker with a space between
the contacts of 3 mm or more must be fitted.
(LS switches, fuses, relays).
The technician is responsible for the correct
installation of the appliance and of its
compliance with local regulations.
y
The earthing of this appliance is
compulsory by law:
for this reason all
current and earth conductors must be of
appropriate size.
Note:
To allow for proper ventilation, we recommend
that you left two openings of min. 500x80 mm
and 500x50 mm inside the cabinet (see
drawing).
11
