background image

2

FIRST TIME USE

 

SALT, RINSE AID AND DETERGENT

ADVICE REGARDING THE FIRST TIME USE

After installation, remove the stoppers from the racks and the retaining 

elastic elements from the upper rack.

FILLING THE SALT RESERVOIR

The use of salt prevents the formation of LIMESCALE on the dishes and 

on the machine’s functional components.

•  It is mandatory that 

THE SALT RESERVOIR NEVER BE EMPTY.

 

•  It is important to set the water hardness.
The salt reservoir is located in the lower part of the dishwasher  

(see PRODUCT DESCRIPTION)

 and must be filled when the 

SALT REFILL  

indicator light

  in the control panel is lit.

1. Remove the lower rack and unscrew the 

reservoir cap (anticlockwise). 

2. Only the first time you do this: fill the salt 

reservoir with water.

3. Position the funnel 

(see figure)

 and fill the salt  

reservoir  right up to its edge (approximately 

1 kg); it is not unusual for a little water to leak 

out.

4. Remove the funnel and wipe any salt residue 

away from the opening.

Make sure the cap is screwed on tightly, so that no detergent can get 

into the container during the wash program (this could damage the 

water softener beyond repair).

Whenever you need to add salt, it is mandatory to complete the pro-

cedure before the beginning of the washing cycle to avoid corrosion.

SETTING THE WATER HARDNESS

To allow the water softener to work in a perfect way, it is essential that 

the water hardness setting is based on the actual water hardness in 

your house. This information can be obtained from your local water 

supplier. 

The factory sets the default value for the water hardness.
•  Switch on the appliance by pressing the 

ON/OFF

 button.

•  Switch off the appliance by pressing the 

ON/OFF

 button.

•  Hold down button 

P

 for 5 seconds, until you hear a beep.

•  Switch on the appliance by pressing the 

ON/OFF

 button.

•  The program indicator light of the current set level flashes.
•  Press button 

P

 to select the desired hardness level (

see WATER  

HARDNESS TABLE

).

•  Switch off the appliance by pressing the 

ON/OFF

 button.

Setting is complete!
As soon as this procedure is complete, run a program without loading.

Only use salt that has been specifically designed for dishwashers.

After the salt has been poured into the machine, the SALT REFILL indi-

cator light switches off.

If the salt container is not filled, the water softener and the heating 

element may be damaged as a result of limescale accumulation.

Using of Salt is recommended with any type of dishwasher detergent.

Water Hardness Table

Level

°dH 

German 

degrees

°fH 

French 

degrees

°Clark  

English 

degrees

1

Soft

0 - 6

0 - 10

0 - 7

2

Medium

7 - 11

11 - 20

8 - 14

3

Average

12 - 16

21 - 29

15 - 20

4

Hard

17

 

- 34

30 - 60

21 - 42

5

Very hard

35 - 50

61 - 90

43 - 62

FILLING THE RINSE AID DISPENSER

Rinse aid makes dish DRYING easier. The rinse aid dispenser 

A

 should be 

filled when the dark optical indicator on the dispenser door 

C

 becomes 

transparent.

1.  Open the dispenser 

B

 by pressing and pulling up the tab on the lid.

2.  Pour in the rinse aid (max.110 ml), making sure it does not overflow 

from the dispenser. If this happens, clean the spill immediately with 

a dry cloth. 

3.  Press the lid down until you hear a click to close it.

NEVER pour the rinse aid directly into the appliance tub.

ADJUSTING THE DOSAGE OF RINSE AID

If you are not completely satisfied with the drying results, you can ad-

just the quantity of rinse aid used.
•  Switch the dishwasher on using the 

ON/OFF

 button.

•  Switch it off using the 

ON/OFF

 button.

•  Press button  

P

 three times - a beep will be heard.

•  Switch it on using the 

ON/OFF

 button.

•  The program indicator light of the current set level flashes.
•  Press button 

P

 to select the level of rinse aid quantity to be supplied.

•  Switch it off using the 

ON/OFF

 button

Setting is complete!
If the rinse aid level is set to 1 (ECO), no rinse aid will be supplied.  
A maximum of 5 levels can be set according to the dishwasher model. 

The factory setting is specific to the model, please follow instruction 

above to check this for your machine.

•  If you see bluish streaks on the dishes, set a low number (2-3).

•  If there are drops of water or limescale marks on the dishes, set a 

mid-range number (4-5).

FILLING THE DETERGENT DISPENSER

To open the detergent dispenser use the opening device D.  

Introduce the detergent into the dry dispenser E only. Place the 

amount of detergent for pre-washing directly inside the tub.

1. When measuring out the detergent 

refer to the mentioned earlier infor-

mation to add the proper quantity. 

Inside the dispenser 

E

 there are in-

dications to help the detergent do-

sing. 

2. Remove detergent residues from 

the edges of the dispenser and clo-

se the cover until it clicks.

3. Close the lid of the detergent 

dispenser by pulling it up until the 

closing device is secured in place. 

The detergent dispenser automatically opens up at the right time  

according to the program.

Usage of detergent not designed for dishwashers may cause mal-

function or damage to the appliance.

A

B

C

D

E

Содержание AIE 2B19 A









Отзывы: