Insert the battery
1.
Take the battery out of the plastic bag.
2.
Open the back cover of the device by inserting your thumbnail into the small groove
on the right-hand side near the bottom of the back cover and lifting up the cover.
3.
Remove the old battery
4.
Install a new battery inside the battery compartment so that the small metal
contacts on the bottom of the battery touch the small metal pins in the battery
compartment.
5.
Replace the back cover of the device.
Charge the battery
1.
Connect the Meter Charger to its adapter cable
2.
Plug the pin into the port at the bottom of unit
3.
Plug the Charger into a power outlet. When the unit begins charging, the charging
light illuminates and a charging battery icon flashes on the screen for a short while.
Charging takes between 2-3 hours to complete.
4.
When charging is complete, the battery icon on the device screen appears solid
green.
5.
Unplug the adapter from the socket.
CAUTION
- Please follow the local regulation to properly recycle rechargeable battery.
- Risk of explosion if battery is replaced by an incorrect type.
Setting Up Your Meter - Setting the Date, Time.
Synchronizing the date and time
To synchronize the date and time manually:
1. Press the “up” (Menu) button on the device. The Menu appears.
2. Select the “Date and Time” option. The “Date and Time” menu appears.
3. Select the “Synch Time” option. A confirmation message appears after a few seconds.
Setting the Time and Date Manually
To set the time and date manually:
1. Press the “up” (Menu) button on the device. The Menu appears.
2. Select the “Date and time” option. The “Date and time” menu appears.
3. Select the “Set Date” option. The year appears. Use the up or down buttons to change
the year as needed. Press the “home” button to move on to the month.
4. Press the up or down buttons to change the month as needed. Press the “home”
button to move to the day.
5. Press the up or down buttons to change the day as needed. Press the “home” button
finish and return to the “Date and time” menu.
6. To exit the menu, press the up or down button to scroll to the “Back” option. Select
the “Back” option to exit the menu.
