EN
21
Installation of SD card and SIM card:
The tablet must be off when the card is inserted and pulled out. First it is necessary to remove the plastic slot
protection. In the upper right corner there is a visible recess; put a fingernail into the recess and push gently
offward, so that the plastic part is released from the legs.. Remove the plastic part carefully to avoid damage
to the antenna located inside. Now you can insert an expansion microSD card and SIM card into the slot.
Avoid frequent opening of the plastic part, because it can damage the plastic legs and Wi-Fi antenna.
Before first use leave the tablet at least 15 minutes to charge, otherwise the tablet may not start.
Produer / exclusive importer of iGET products to EU:
INTELEK spol. s r.o., Ericha Roučky 1291/4, 627 00 Brno - Černovice, CZ
WEB: http://www.iget.eu
SUPPORT: http://www.iget.eu/helpdesk
Copyright © 2017 INTELEK spol. s r.o. All rights reserved
Содержание SMART G101
Страница 32: ...WARRANTY CARD 32...
