![background image](http://html1.mh-extra.com/html/igenix/ig2611/ig2611_user-manual_3951711005.webp)
5
APPLIANCE OVERVIEW
Control Panel
Cord Wrap
Castor Assembly
Fin
Mounting the Castors
1. Turn the heater upside down.
2. As shown in figure 1, align the mounting hole of the caster assembly and install it on the screw of the caster
pad plate at the end of the radiator fin. The other caster assembly is aligned to the screws mounted at the
bottom of the control box.
3. As shown in figure 2, tighten the two sets of caster assemblies with four butterfly nuts. Tighten the nuts and
then return the heater to an upright position with the wheels on the ground.
Figure 1
Figure 2
Butterfly Nuts
Control Box