7
ASSEMBLY INSTRUCTIONS
1. Remove rear guard nut (5) from the fan motor (7).
2. Fit rear guard (6) by positioning it on the location pins at the top and
bottom. Use the rear guard nut (5) to secure the rear guard to the motor
shaft.
3. Slot the fan blade (4) onto motor shaft (7) until the fan blade (4) reaches the
retaining pins.
4. Secure the fan blade with the fan blade cap (2) by turning it anti-clockwise.
Check that the fan blades rotate freely by turning with your hand.
5. Open the securing clips around the front guard (2) and unscrew the guard
screw and nut (13) located at the bottom of the front guard.
6. Line up the front guard (2) with the rear guard (6) so that the hole located at
the base is aligned. Close guard clips then tighten guard screw and nut (13).
Mounting to a Wall
1. Select an appropriate location and fix the wall mounting bracket (10) onto a
strong wall (or locate a stud behind plaster board) with 2 wall plugs (12) and
screws (11) supplied.
Note: Consider a location within a distance of 0.8m radius from a power
socket to make sure the unit can be plugged in easily.
2. Mount the wall fan on the wall mounting plate and plug in.
Note: If the power cord is hanging loosely between the fan and the power
socket, make sure that it will not touch or obstruct fan blade rotation or fan
oscillation in any way.