4
MOUNTING INSTRUCTIONS
• Take the unit out of the box, removing any packaging
• Remove the adjustable tilt screw and nut form the stem of the clamp base
• Insert the fan motor head in to the stem of the clamp ensuring that the power cord is aligned with
the curved part of the stem and that the holes within both stem and fan motor head are aligned
• Insert the tilt screw (left hand side) and nut (right hand side) into position and tighten to
desired angel
• Clip on to a secure and level surface
• As well as the tilting action of the fan motor head, the stem can be rotated 360° to provide
optimum directional airflow
CLEANING AND MAINTENANCE
• Turn off the fan and remove the plug from the power socket before cleaning
• Use a dry soft cloth to remove any dust from the fan
• If the fan is particularly dirty use a soft damp cloth and wipe dry
• Do not use any chemicals or detergents as they will damage the fan
• It is recommended to cover the fan with a plastic bag before storage to prevent
dust collecting on fan blades
• Store the fan in a ventilated and dry area
• Do not allow water to get inside the body of the fan
Remove the fuse cover with a small flat head screw driver. Take
out the fuse and replace with a new fuse of the same Amp.
Replace the fuse cover and push back into place.
Fuse Cover
FUSE REPLACEMENT
OPERATING INSTRUCTIONS
• Clip on to a secure and level surface
• Plug the power cord into a power socket
• You can adjust the fan to the desired angle by rotating the stem and using the adjustable tilt screw
• Turn the control dial to desired speed
0 = Off
1 = Low Speed
2 = High Speed
