
4
1. Place the fan on a dry flat surface
2. Ensure power switch is set to ‘O’ off,
this can be found on the rear of the fan
3. Insert USB plug into USB port of computer.
Note: When plugging in, pay attention to the position of the plug.
Forcing it may damage or break the USB plug or your computer
or DC5V adaptors USB port.
4. The fan can now be switched on ‘I’ by the power switch found
on the rear of the fan.
Note: If the computer is off then the fan will not
work as it will not receive any power.
5. To adjust the air flow ensure the fan is switched off and
unplugged then simply tilt the fan to your required angle.
APPLIANCE OVERVIEW
OPERATING INSTRUCTIONS
1. Front Grill
2. Blade
3. Blade axle sleeve
4. Motor
5. Motor hearing
6. Rear Grill
7. Switch
8. Stand
9. Rubber Feet
10. USB Cord