Igema BA14, Сборка и руководство по эксплуатации

Страница: 12 / 28

12
5.2 Type of connection
Standard
: flanges according to DIN or ASME
On request
: welding end or socket welding
according to DIN or ASME
5.3 Materials
Components in contact with the medium and pressure-holding components are made of C
steel according to DIN or ASME.
5.4 Application limits
5.5 Corrosion resistance
The safety of the unit is not influenced by corrosion if it is used as intended
5.6 Identification plate / Marking
The following data are indicated on the identification plate:
* marking depending on the realization
A
Date of manuf Order number
B Type of unit
C Max. allowable pressure
D Max. allowable temperature
E Nominal pressure (not listed)
F Nominal diameter
Max. allowable pressure PS [bar] 32 50 80
Max. allowable temperature TS [°C] 239 265 296