Igel UD7 Series, Быстрый старт, Страница: 3 / 5

IGEL Devices
Boot Settings 3 / 5
11.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
1.
2.
You can continue with the installation procedure.
UD6 (H830C)
Power up the device while pressing the [Del] button repeatedly in rapid succession.
Select
SCU .
If a password prompt is shown, enter the BIOS password.
Select the Boot tab.
Set USB Boot to <ENABLED> .
Save the settings and exit.
Connect the USB stick to the device.
Reboot the device while pressing the [Del] button repeatedly in rapid succession.
Select
Boot Manager .
Select the USB stick as the boot medium and press Enter .
You can continue with the installation procedure.
UD5 (H830C)
Power up the device while pressing the [Del] button repeatedly in rapid succession.
If a password prompt is shown, enter the BIOS password.
Select the Boot tab.
Select Boot Options Priorities .
Select the entry for the USB stick and move it to the first position using the [+] key.
Save the settings and exit.
You can continue with the installation procedure.
UD3 (M350C)
Power up the device while pressing the [Del] button repeatedly in rapid succession.
If a password prompt is shown, enter the BIOS password.
Select
Setup Utility .
Select the Boot tab.
Set USB Boot to <ENABLED> .
Save the settings and exit.
Connect the USB stick to the device.
Reboot the device while pressing the [Del] button repeatedly in rapid succession.
Select Boot Manager .
Select the USB stick as the boot medium and press Enter .
You can continue with the installation procedure.
UD3 (M340C)
Power up the device while pressing the [Del] button repeatedly in rapid succession.
If a password prompt is shown, enter the BIOS password.