3
Charging
• Please fully charge the earphone and charging
case before using it for the first time.
• Connect the USB A end of the charging cable to
a USB charging port and insert the micro USB
end to the part on the charging case. Make sure
it is properly connected.
• The red indicator light will be lit while the
charging case is charging. When the battery is
full, the red indicator light will not switch off.
• Put the earbuds into the charging case to
charge it. The red indicator light will be lit while
the earphones is charging, and the blue
indicator light will lit on the charging case.
When the battery is full, the red and blue
indicator light will switch off.
• Please do not charge more than 8 hours.
Bluetooth Pairing
Your earphone must be paired to a Bluetooth
device before it can be used. It is only necessary to
pair your speaker once with each device.
1. Long press the button on the earphone. The LED
light will flash blue and will prompt “power on”.
2. After few seconds, earphone will prompt
“pairing”, this means that the earphone is ready
to pair with your Bluetooth playback device.
