Front View
Start up
Detector Order Codes With M16 Connectors
6 Entries 20.5mm
172mm
158mm
97.5mm
SETUP
WIZARD
Side View
76mm
18mm
RUN
10 s
Accessory Order Codes
Gas Collector Cone*
Remote Gassing Kit*
Cal Gas Adaptor
Splashguard
Output Relay Node
(Use With Beacons)
Beacon Sounder
With Signage
5A PSU With Battery
Backup 110/230V AC
2.5A 24V DC PSU
110/230V AC
*Collector Cones and remote gassing kits
also require the splash guard to be fitted
-5 to To 55 Deg C
0-95% RH Non-Condensing
IP54
Temp Rating
Humidity Rating
Sealing
5 Way M16
Connector
For Detector/Node
Connection
5210101
5110150
5925701
TOC-30-GD
TOC-30P-NDE
TOC-30P-BCN
TOC-PSU-B
TOC-PSU
Page 3
International Gas Detectors
0-100% LEL
0-100ppm
0-30% Vol
0-20ppm
0-5%
0-5000ppm
TOC-30P-PHC
TOC-30P-CO
TOC-30P-O2
TOC-30P-CL2
TOC-30P-CO2
TOC-30P-LCO2
>3 Years
>5 Years
>5 Years
>2 Years
>5 Years
>5 Years
Gas Standard Range Order Code Typical Cell Life
Flammable Gases
Carbon Monoxide
Oxygen
Chlorine
Carbon Dioxide
Carbon Dioxide
0-50ppm TOC-30A-H2S >3 Years
Hydrogen Sulphide
After the start up cycle the Setup Wizard is displayed and RUN option will be available for 10
seconds. Press the button during this period and the TOC-625 Micro will search for connected
detectors and relay nodes. Based on the devices found the controller will set itself up based on
table 1. No operator intervention is required. Gas channels will be automatically configured based
on the devices found. Need to add or remove a detector or node? Just make the physical changes
and select the RUN option again on power up
