manualshive.com logo in svg

iGage iG4, Руководство пользователя

Поделиться
Скачать
iGage iG4 Скачать руководство пользователя страница 10

10 

The receiver is suitable for use in a human appropriate atmosphere, it is not suitable for use in 
explosive environments. 

Risk of Electrocution: Because of risk of electrocution it is very dangerous to use poles or extensions 
in the vicinity of overhead electrical lines. Maintain a safe distance from overhead electrical delivery 
systems. 

If the receiver is used on a pole during an electrical storm there is a very high risk of being struck by 
lightning. Do not use the product during a thunderstorm. 

Battery Safety and Disposal 

The batteries are lithium-ion type cells. 

Battery Warnings 

WARNING - Do not damage the rechargeable Lithium-ion battery. A damaged battery can cause an 
explosion or fire, and can result in personal injury and property damage. 

To prevent injury or damage: 

Do not use or charge the battery if it appears to be discolored, warped, or leaking battery fluid. 
Do not expose the battery to fire, high temperature, or direct sunlight. 
Do not immerse the battery in water. 
Do not store the battery inside a vehicle during hot weather. 
Do not drop or puncture the battery. 
Do not open the battery or short-circuit its contacts. 
Do not charge the batteries in chargers other than the supplied charger or a direct replacement. 
Do not charge similar batteries in the supplied charger, even if they fit well. 
Do not short circuit the battery terminals or store batteries in a way that allows inadvertent shorting. 

WARNING - Avoid contact with the rechargeable Lithium-ion battery if it appears to be leaking. The 
battery fluid is extremely corrosive, and contact with it will result in personal injury and/or property 
damage. 

If battery fluid gets into your eyes, immediately rinse your eyes with clean water and seek medical 
attention. Do not rub your eyes! 

If battery fluid gets onto your skin or clothing, immediately use clean water to wash off the battery 
fluid. 

Batteries 

One Lithium-Ion battery is supplied with your receiver. 

 

For shipping regulation compliance, batteries are shipped inside the receiver and are fully 
discharged. You will need to remove the battery from the receiver and fully charge it before first 
use. 

If you plan on running the receiver for longer than 5-hours, it is suggested that you use the supplied 
Battery Clip cable to connect the auxiliary power connector to an external 12-volt battery. 

Содержание iG4


























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды