7
C12 User Manual
Connection using C12P9 Serial Port
The supplied serial cable will directly connect to a Windows PC type serial port. If your computer does not have a
serial port, use a USB to Serial convertor to connect to the C12 serial port.
Configuration of the C12 using the Ethernet Port
The ‘User Manual’ contains detailed configuration information for setting the C12 as a base or a rover. See section
6 for the ‘Quick Setup Guides’ to get started.
Typically you will need to set the C12 Ethernet settings to match your network. Use Trimble the WinFlash utility to
set the device Ethernet parameters.
See the section ‘Configuring Ethernet settings’ in the ‘User Guide’ for step-by-step instructions on using WinFlash
to configure the station.
See the section ‘Web Interface’ for information on logging in.