End a Call
Use either of the following methods to end a call.
Method-1
Press multifunction key one time to end a call from the headset.
Method-2
End a call from the mobile phone’s keypad.
If you are listening to music when there is an incoming call the headset will switch
the connection from the music player (A2DP) to the mobile phone (HSP or HFP); the
streaming music will be paused temporarily. After you end the call, the music will be
played and streamed to the headset again.
Notes: When you press multifunction key to answer or end a call, please
just press one time. Do not press and hold.
Refuse a Call
When there is incoming call, press and hold multifunction button for about 2
seconds until you hear prompt from the headset. Release the button and the call is
refused.
Redial the last dialed number
Press and hold multifunction key for 2 seconds to redial the last dialed number.
Adjust volume
In call mode or music mode, press /- key to adjust volume. One short
press will adjust one level. When the volume reaches max or min, when you press,
the headset will prompt “du-du”.
Play/Pause music
In idle state, press multifunction button one time to play or pause music.
Previous/Next song
When playing music, you can press “forward” button to play previous song and
“backward” button to play next song.
Switch the call between mobile and headset
In call state, press and hold multi function button for 2 seconds until there is prompt
from headset. The call will be switched from headset to mobile or vice versa.
Troubleshooting
If disconnection occurs, please check the following factors:
1) Ensure that the headset has enough power; it is turned on and has been
successfully paired to the mobile.
2) The Bluetooth function of the mobile is enabled.
3) Check whether the range between the headset and mobile is over 10 meters
(about 30 feet.) Or there is wall or other disturbance or other electrical devices
between headset and mobile.
