iGadgitz IGX-470S, Руководство пользователя

Страница: 7 / 20

6
The general pairing procedures are as follows, however, you may need
to refer to your Bluetooth device’s manual on how to pair with a
Bluetooth device.
1) Keep your Bluetooth enabled device within 1 metre when pairing;
2) Make IGX-470S enter pairing mode as shown below:
Function Operation
Entering
pairing
mode
Ensure IGX-470S is off. Press and hold
Multi-Function Button for approximately 7
seconds until Red and Blue LED flash rapidly
“power on…pairing”
3) Using your Bluetooth device, scan/search for available Bluetooth
devices. Select “IGX-470S” from the list of devices shown;
4) If prompted, enter password or PIN No: “0000”
5) If prompted by your device to connect, select “Yes” (this will vary
among devices)
6) After successfully connecting, the Blue LED of the earphones will
flash once every 6 seconds “connected”
Pairing | Connecting