International Fiber Systems, Inc.
16 Commerce Road
•
Newtown, Connecticut 06470 USA
•
Tel: 203.426.1180
•
Fax: 203.426.3326
VT/VR1505 Rev: 1 08/21/98
MOUNTING STAND-ALONE UNITS
Hold the VT1505 or VR1505 series module against the mounting surface and mark the locations of the
keyhole slots on the rear mounting brackets. Install mounting screws into keyhole marks, allowing leeway
under the screw heads for the box to be mounted. Mount the brackets over the screws, slide, and tighten.
VIDEO LINK OPERATION
Make sure that power is applied to the VT1505 and VR1505 series modules, camera, and video monitor.
Ensure that the camera and monitor are turned on, and that any lens cover on the camera has been removed.
Verify that coaxial cables and fiber optic cable are properly connected (i.e., the same fiber connects to the video
input and output on transmitter and receiver). Successful link operation should be visible at this point as
witnessed by a good quality video picture on the monitor.
