2 / 4
P/N 1073661-EN
• REV
D
• ISS
03JUL22
Chrome (version 45 or later), Mozilla Firefox (version 52 or
later), and Apple Safari (version 10 or later).
Logging in to the managed switch
1
.
Use
the
Internet Explorer
11
.0 or later
web
browser
and
type the
IP address http://192.168.
0
.
100
(the factory
-
default IP address) to access the web
interface.
2
.
When the following window
appears, enter the default user
name
“
admin
”
and password “admin
”
(or the
password you
have changed before)
as shown in
Figure
5
below.
Default IP Address:
192.168.0.100
Default User
N
ame:
admin
Default Password:
admin
Note
: Before connecting to a TruVision Navigator video
surveillance system network, the default IP address must be
changed to the IP address assigned for TruNav by the network
administrator.
Figure 5: Login screen
3
.
A Warning message then appears to notify the user to
change the user name and password. Click
OK
to begin
the process of changing the default username and
password.
4
.
Type a new username and password in the Edit User
page, following the guidelines as shown. Click
Apply
.
5.
When the success window appears, click
OK
.
6
.
After typing
the new
username and password
in the login
window
,
the
main screen appears.
Figure 6: Main web interface screen
7
.
The
switch menu on the left side of the web
page permits
access all the functions
and
status
provided by the
managed switch.
Refer to the
U
ser
M
anual for further information about using
the web
management interface.
Note
: For added security, a logged in user is automatically
logged out after five minutes of inactivity.
Saving the configuration
To save all applied changes and set the current configuration
as a startup configuration, the startup
-
configuration file is
loaded automatically across a system reboot.
1
.
Click
the
Save
icon on the top switch menu bar.
Resetting the switch to default
To reset the IP address to the default IP address
“192.168.0.100”
and the user
password to factory default mode
(default password is
“
admin
”
), press the hardware reset button
on
the front panel for about five
seconds. After the device
reboots, log
in to the management web
interface within the
same subnet of 192.168.0.xx
and default password.
N
ote
that
all the previous setups are erased
after the factory default
reset.
