> Please charge the HS1000 before using.
> Please fully charge the battery before long storage.Please check the HS1000 remaining power level every 3
months and full recharge it again.
> There have 3 input ports on the Portable Power Station: 1* AC Input Port, 1* solar panel input port and
1* DC5521 port.
1.
Super Quick charging：AC Input (AC power supply can be used to charge Portable Power Station with a maximum
power of 1000W through the AC charging port.).
2. Solar charging.
3. Car charging.
How to charge
Under the condition that the total power does not exceed 1000W, all ac outlets can work togehter at the same time.
1. Make sure there is no AC input
，
Long press the main power button 3S to turn on. The main power indicator
and the screen lights up, enters the standby state.
2. Plug in AC appliances.
3. Tap the AC on/off switch to turn on the AC output function. The product starts to supply power to external AC
appliances.
4. Long press the AC power on/off switch to turn off the AC output.
5.
When not using the product for a long time，please long press the main power switch for 3S to turn off to save
power.
How to use the AC output function
AC
ON/OFF
POWER
ON/OFF
ATTENTION:
· It must be charged by solar panels with a voltage lower than 30V.
· The input voltage exceeding 30V has the risk of damaging the product.
Portable Power Station support Solar Panel charging Max 300W.
You can purchase solar panels and dedicated cable accessories that match the Portable Power Station to achieve
a high-power solar fast charging experience.
CAUTION：
The maximum voltage of solar panels that Portable Power Station can support is 30V,and
the maximum current is 10A.
Solar Panel series/parallel charging
1. Long press the main power button to turn on.The main power indicator and the screen lights up, enters
the standby status.
2. Click the USB on/off switch to turn on the USB function.
3. Plug in the USB devices and start to use.
How to use USB output
1.
Can the product be taken on the plane?
No, because this product is a products with battery, according to international air transportation standards and
regulations, battery capacity products cannot exceed 100Wh.
2.
The consumers
’
power is within the rated output power range of the Portable Power Station but
cannot be used?
Because the product has a low power, it needs to be fully recharged and used again.
3.
Why is there a noise sometimes.
Because this product uses an air-cooled system, the built-in fan can better help the product to dissipate heat, so
it is normal for a slight noise to occur during use.
4.
How do I store the product when it's not in use?
The portable power station needs to be stored in a dry environment, and the correct storage method can prolong
the service life of the portable power station.
5.
How do I clean the product if it is dirty?
Please use a dry non-abrasive cloth to wipe. Do not wipe directly with a wet cloth or chemical solvent. If you want
to wipe it more cleanly, we recommend that you use a cotton swab with a small amount of absolute alcohol
to wipe. Do not expose the product to large amounts of water.
FAQs
1.
Long press the main power button to turn on.The main power indicator and the screen lights up, enters
the standby state.
2. Plug in the DC device.
3. Click the DC on/off switch to turn on the DC function.
4. After use, click the DC on/off switch to turn off the DC output.
5.
When not using the product for a long time，please long press the main power switch for 3S to turn off to save power.
How to use DC output
CAUTION:
· When charging HS1000 by AC input. The AC output function will be stay off, and
it cannot be turned on by using the AC ON/OFF switch.
· If HS1000 is charged through the AC input during the AC output operation, the AC
output will be turned off automatically.
CAUTION:
· When charging HS1000 by AC input. The AC output function will be stay off, and
it cannot be turned on by using the AC ON/OFF switch.
· If HS1000 is charged through the AC input during the AC output operation, the AC
output will be turned off automatically.
