> Please charge the HS1000 before using.
> Please fully charge the battery before long storage.Please check the HS1000 remaining power level every 3
months and full recharge it again.
> There have 3 input ports on the Portable Power Station: 1* AC Input Port, 1* solar panel input port and
1* DC5521 port.
1.
Super Quick charging：AC Input (AC power supply can be used to charge Portable Power Station with a maximum
power of 1000W through the AC charging port.).
2. Solar charging.
3. Car charging.
How to charge
Under the condition that the total power does not exceed 1000W, all ac outlets can work togehter at the same time.
1. Long press the main power button 3S to turn on. The main power indicator and the screen lights up, enters
the standby state.
2. Plug in AC appliances.
3. Tap the AC on/off switch to turn on the AC output function. The product starts to supply power to external AC
appliances.
4. Long press the AC power on/off switch to turn off the AC output.
5.
When not using the product for a long time，please long press the main power switch for 3S to turn off to save
power.
How to use the AC output function
ATTENTION:
· It must be charged by solar panels with a voltage lower than 30V.
· The input voltage exceeding 30V has the risk of damaging the product.
Portable Power Station support Solar Panel charging Max 200W.
You can purchase solar panels and dedicated cable accessories that match the Portable Power Station to achieve
a high-power solar fast charging experience.
CAUTION：
The maximum voltage of solar panels that Portable Power Station can support is 30V,and
the maximum current is 7A.
Solar Panel series/parallel charging
1. Long press the main power button to turn on.The main power indicator and the screen lights up, enters
the standby status.
2. Click the USB on/off switch to turn on the USB function.
3. Plug in the USB devices and start to use.
How to use USB output
1.
Can the product be taken on the plane?
No, because this product is a products with battery, according to international air transportation standards and
regulations, battery capacity products cannot exceed 100Wh.
2.
The consumers
’
power is within the rated output power range of the Portable Power Station but
cannot be used?
Because the product has a low power, it needs to be fully recharged and used again.
3.
Why is there a noise sometimes.
Because this product uses an air-cooled system, the built-in fan can better help the product to dissipate heat, so
it is normal for a slight noise to occur during use.
4.
How do I store the product when it's not in use?
The portable power station needs to be stored in a dry environment, and the correct storage method can prolong
the service life of the portable power station.
5.
How do I clean the product if it is dirty?
Please use a dry non-abrasive cloth to wipe. Do not wipe directly with a wet cloth or chemical solvent. If you want
to wipe it more cleanly, we recommend that you use a cotton swab with a small amount of absolute alcohol
to wipe. Do not expose the product to large amounts of water.
FAQs
1.
Long press the main power button to turn on.The main power indicator and the screen lights up, enters
the standby state.
2. Plug in the DC device.
3. Click the DC on/off switch to turn on the DC function.
4. After use, click the DC on/off switch to turn off the DC output.
5.
When not using the product for a long time，please long press the main power switch for 3S to turn off to save power.
How to use DC output
1. Plug in the AC input to power the Portable Power Station. The product automatically turns on and enters the
charging mode.
2. Plug in the AC devices.
3. Click the AC on/off switch to turn on the AC output function. The AC output enter into the UPS mode.
4. When the external AC power is cut off, Portable Power Station continues to provide AC power to power devices/applications.
ATTENTION:
· Ensure that the AC input terminal is connected to the ground wire stably and normally.
· Ensure to use the backup UPS function normally,the power of AC electrical
appliances must be less than input power. If it is more than input power, for safety
considering Portable Power Station automatically disconnects the external AC
input and uses its own battery to provide AC power.
· When the battery power shows 0%,the UPS function will works normally if the
output power equal or less than the input power.But when input power less
than the output power,HS1000 will shut down automatically.
How to use UPS function
CAUTION：
· The UPS function of this product is not a professional-grade UPS function. Please do not
connect it to an equipment that requires high requirements for uninterrupted power
supply (such as data servers and workstations, etc.); or please test it several times firstly to
confirm whether it is compatible before using it, otherwise it will affect your experience.
· If any equipment do not work properly or the data is lost due to the incorrect
operation, our company will not be responsible for this.
AC
ON/OFF
AC
ON/OFF
POWER
ON/OFF
