Installing the X2 mini onto the shark slider mini
Initialisation failed
Initialisation complete
It is important to test out the overall balance
and functionality of the X2 Mini when attached
to the slider fully laden, in other words with the
camera and lens attached. When using a long
lens, please adjust the positioning of the camera
in order to balance it on the X2 Mini. Failure to do
so may result in the slider and camera tipping forward.
Step :
You should insert the shutter cable after mounting the camera.
Shutter cable
* If using long lenses, please ensure the center of balance is adjusted properly
prior to switching on. With its built-in sensor, the X2 Mini will automatically find
its starting point after power up. If using the X2 Mini on a tripod, it will use the
power up position as the starting point.
Using the remote control App
It is worth noting that the maximum pitch angle
range for X2 Mini is ±35° and that once switched
on the X2 will automatically look for the initial status
/zero point. Please ensure there is no obstacle on the
track prior to start up.
