3
GB
3 Installation
►
Mount only in a thick housing wall
(e.g. transport thread).
►
Ensure that the signal direction is
correct.
►
Ensure a safe vibration
transmission and allow no elastic
intermediate layers.
►
Select either the ¼"-28 UNF / M8
(2) or the ¼"-28 UNF (3) threaded
adapter and insert into the unit (1).
Threaded adapters are supplied.
►
Tighten using a 3 mm Allen key.
Tightening torque 8 Nm.
►
Drill and tap a hole at the mounting
location:
- M8 hole / depth min. 10 mm for
threaded adapter ¼"-28 UNF/ M8.
- Or ¼"-UNF hole / depth min.
13 mm for threaded adapter
¼"-28 UNF.
►
Tighten the unit with a tightening torque of 8 Nm.
4 Electrical connection
The unit must be connected by a qualified electrician. The national and
international regulations for the installation of electrical equipment must be
adhered to.
M12
4
1
2
3
L+
L
1
2
Pin 1: L+ (9.6...32 V DC)
Pin 2: 4...20 mA
