background image

4

• The product must be suitable for the corresponding applications and

environmental conditions without any restrictions.

• Only use the product for its intended purpose (

Ò

 Intended use).

• Only use the product for permissible media.

• If the operating instructions or the technical data are not adhered to, personal

injury and/or damage to property may occur.

• The manufacturer assumes no liability or warranty for any consequences

caused by tampering with the product or incorrect use by the operator.

• Installation, electrical connection, set-up, operation and maintenance of the

product must be carried out by qualified personnel authorised by the machine
operator.

• Protect units and cables against damage.

3 Intended use

The unit detects the medium temperature of liquid and gaseous media.

3.1 Application area

The temperature sensor is used together with a clamp connection in the beverage
and food industries.

4 Installation

CAUTION

During installation or in case of mechanical failure, high pressure or
hot media can leak from the system.

w

Risk of injury caused by pressure or burns.

u

Ensure that the system is free of pressure during installation.

u

Ensure that no media can leak at the mounting location during
installation.

u

Position the unit in the process connection.

u

Secure the unit with a suitable clamp.

Содержание TM48 Series








Отзывы: