5
UK
5 Installation
► Horizontal mounting recommended for high medium temperatures�
► Connect the unit to the process using a fixing element (adapter, clamp)�
Information about the available adapters at www�ifm�com�
► Observe the instructions of the adapter�
► Use a lubricating paste which is suitable and approved for the ap-
plication�
Use in hygienic areas to 3A requirements:
► Make sure that the sensors are integrated into the system in accordance with
3A�
► Tighten seals to defined torque and ensure seals are centered�
Use in hygienic areas to EHEDG:
► Make sure that the sensors are integrated into the system in accordance with
EHEDG�
5.1 Units with G½ sealing cone (type TA25xx)
About sensor installation conforming to 3A:
► Insert PEEK sealing ring E43911�
► Carry out installation according to separate installation instructions of
the sealing ring�
The PEEK sealing ring is not supplied with the unit� It must be ordered separately�
Order no�: E43911�
