6
►
Connect and ground the encoder housing, the connector/ terminal box and the
evaluation electronics via the screen
►
Connect the device according to the indications on the type label
5.2 Standard wiring
white / pin 3 brown / pin 1 green / pin 2 yellow /
pin 4
grey / pin 5 pink / pin 6
0 V sensor
U
b
sensor
clock
clock (inv)
data
data (inv)
blue / pin 7
red / pin 8
screen
reset to zero reversal of direction of
rotation
housing
6 Operation
6.1 Data signals
Code signal data input:
TTL compatible signals, clock and clock (inv) from driver to RS 422
Code signal data output:
synchronous serial, TTL compatible signals data and data (inv)
6.1.2 Triggering of a data word
1: clock
2: data
T = 1...10 μs / t1 ≤ 0.4 μs (without cable) / t2 = 17...20 μs (waiting time)