5
USA
English
R1D200/R2D200/R2D201/R2D210
FCC information:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1. This device must not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications to this device that have not been expressly
approved by ifm could void the user‘s authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own
expense.
RF Exposure Info:
Due to radio frequency exposure limits this device should be installed and
operated with a minimum distance of 20 cm between the device and the
body of the user or nearby persons.
The measurement results comply with the FCC limit per 47 CFR §2.1091
for the uncontrolled RF Exposure of mobile devices.
Canada / Canada
English
R1D200/R2D200/R2D201/R2D210
ISED note:
