IFM O5H5 Series Скачать руководство пользователя страница 4

Страница: 4 / 5

6 Settings

6.1 Sensitivity setting
The sensor is to switch when the object is detected

►

Position the object.

►

Press [OUT on] for 2 s.

> The sensitivity is set to the object. The LED flashes.

►

Remove the object.

►

Press [OUT off] for 2 s.

> The sensitivity is set to the background.

> The LED goes out. The setting operation is completed.

The sensor is not to switch when the object is detected

►

Position the object (see figure 1) and press [OUT off].

►

Remove the object (see figure 2) and press [OUT on].

The settings can also be carried out first without object and then with object.

6.2 Setting of maximum sensitivity

►

Align the sensor so that no light is reflected.

The sensor is to switch when the object is detected

►

First press [OUT on], then [OUT off].

The sensor is to switch when the object is not detected

►

First press [OUT off], then [OUT on].

Содержание O5H5 Series





