IFM LW2120, Руководство по эксплуатации

Страница: 36 / 37

LW2120 Electronic level sensor
36
10 Factory setting
Parameter Factory setting User setting Access
Application Specific Tag ***
Function Tag ***
Location Tag ***
uni m
Reference height Initial value
tank offset 0 (m)
Upper blind zone 0 (m)
P-n PnP
out1/out2 SSC1 / I (4…20 mA)
dS1/dS2 0 (s)
dr1/dr2 0 (s)
SSCx* Param. SP1 0.2 (m) !
SSCx* Param. SP2 0 (s) !
SSC* Confic. Logic no
SSC* Confic. Mode Single point
SSC* Confic. Hysteresis 0.05 (m) !
ASP2 0 (m) !
AEP2 0.2 (m) !
FOU2 OFF
dAP 2 (s)
S.Lvl 5 (m)
S.Tim 60 (min)
Alert mode delay time 180 (s)
Detection threshold 100 (mV)
*x = 1 for OUT1, 2 for OUT2
Parameters marked with “!” (under Access) (e.g. [SSCx* Param. SP2]) are only active if the
assigned parameters have been selected.