IFM IO-Link master-PROFINET AL1102, Руководство по эксплуатации

Страница: 21 / 59

IO-Link Master with PROFINET Interface StandardLine 8 Ports IP 65 / IP 66 / IP 67
21
8 Set-up
Content
Read device and diagnostic information ................................................................................................22
52476
When the supply voltage has been switched on, the AL1102 starts with the factory settings. The
display elements signal the current operating status (
→
Operating and display elements (
→ S.
18 )).
To enable parameter setting of the AL1102, the fieldbusinterface of the network environment must be
configured correspondingly.
► Configure the fieldbus interface (ports X21 / X22) (→
Fieldbus: Set PROFINET interface
(
→ S.
27 ) or
→
Integrate the IO-Link master in the project (
→ S.
35 )).
>
The fieldbus interface has valid IP settings.
>
The user can set the parameters of the AL1102.
Further steps:

Optional: Update the firmware of the AL1102 (
→
Firmware update (
→ S.
41 )).

Set the parameters of the AL1102 (
→
Configuration (
→ S.
23 )).