IFM G2001S Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 27

IFM G2001S Скачать руководство пользователя страница 6

6

4 Functions and features

The G2001S safety relay is a redundant system and suited for use as muting relay

in conjunction with 2 muting sensors�

ifm electronic gmbh assumes no liability for the use of units made by

external manufacturers�

The safe state is when the output contacts (12/22 or 23/24) are open�

4.1 Requirements for the hardware configuration

The following requirements must be met when using the G2001S safety relay:

4.1.1 Product-independent requirements

It must be ensured that the safety requirements of the respective application

correspond to the requirements stated in these instructions�
The specified technical data indicated in these instructions must be complied with�

4.1.2 Product-dependent requirements

The safety relay is only to be used for muting applications in conjunction with

safety light curtains / light grids�
The response times of all safety components are to be considered (e�g� safety

light curtains / light grids)�
In case of faults within the safety relay which result in the defined safe state, the

safety relay must be replaced�
Any faulty unit should be returned to the manufacturer�

«
...
4
5
6
7
8
...
»

Содержание G2001S




























Отзывы:

Нет отзывов