Operating instructions FX460
36
OUTPUT TARGET 3
Assignment of an output for the switching condition of preselection 3, see Preselection 1 Menu
OUTPUT POLARITY 3
Switching status for the switching condition of preselection 3, see Preselection 1 Menu
OUTPUT LOCK 3
Latching for the switching condition of preselection 3, see Preselection 1 Menu
START UP DELAY 3
Start-up delay for the switching condition of preselection 3�
Time window until the monitoring function has been activated� This setting only applies for the switching
conditions ¦RESULT¦≤¦PRES¦ and RESULT≤PRES as well as in the SPEED and PROCESS TIME
operating modes�
OFF
No start-up delay
AUTO
Automatic start-up delay until the preselection value / switch point has
been exceeded for the first time
EVENT COLOR 3
Event-dependent colour change of the display for the switching condition of preselection 3, see
Preselection 1 Menu
9.12 Preselection 4 Menu
SOURCE 4
MODE 4
Switching condition for preselection 4, see Preselection 1 Menu (except tracking preset)
See Preselection 1 Menu
RES≥PRES-TRAIL
Tracking preset 4:
Display value greater or equal to preselection 3 – preselection 4
Preselection 4 is the tracking preset of preselection 3�
HYSTERESIS 4
Switching hysteresis for the switching condition of preselection 4, see Preselection 1 Menu
PULSE TIME 4 (S)
Duration of the fleeting pulse for the switching condition of preselection 4, see Preselection 1 Menu
OUTPUT TARGET 4
Assignment of an output for the switching condition of preselection 4, see Preselection 1 Menu
OUTPUT POLARITY 4
Switching status for the switching condition of preselection 4, see Preselection 1 Menu
OUTPUT LOCK 4
Latching for the switching condition of preselection 4, see Preselection 1 Menu
START UP DELAY 4
Start-up delay for the switching condition of preselection 4, see Preselection 3 Menu