1 Safety instructions
These instructions are part of the device. They contain information
and illustrations about the correct handling of the device and must
be read before installation or use.
Adhere to the instructions. Non-observance of the instructions, operation which
is not in accordance with use as prescribed below, wrong installation or handling
can result in serious harm concerning the safety of persons and plant.
These instructions are intended for “authorised” persons according to the EMC
and low-voltage directives. The device must only be installed, connected and put
into operation by a qualified electrician.
Disconnect the device externally before handling it. If necessary, also disconnect
any independently supplied output load circuits.
If the device is not supplied by the mobile on-board system (12/24 V battery
operation), it must be ensured that the external voltage is generated and
supplied according to the criteria for safety extra-low voltage (SELV) as this
voltage is supplied without further measures to the connected controller, the
sensors and the actuators.
The wiring of all signals in connection with the SELV circuit of the device must
also comply with the SELV criteria (safety extra-low voltage, safe electrical
separation from other electric circuits).
If the supplied SELV voltage has an external connection to ground (SELV becomes
PELV), the responsibility lies with the user and the respective national regulations
for installation must be complied with. All statements in this manual refer to the
device the SELV voltage of which is not grounded.
The connection terminals may only be supplied with the signals indicated in the
technical data and/or on the device label and only the approved accessories of
ifm electronic gmbh may be connected.
In case of malfunctions or uncertainties please contact the manufacturer.
Tampering with the device can lead to serious risks for the safety of persons and
plant. It is not permitted and leads to the exclusion of any liability and warranty
claims.
ETHERNET CAMERA
O2M110
4
