2
1 Functions and features
The through-beam sensor detects objects and materials without contact and
indicates their presence by a switching signal.
For the range see the type label.
2 Installation
►
Install the receiver (OGE38x) and secure it to a bracket.
►
Align the transmitter (OGS38x) to the receiver and secure it also to a bracket.
> Maximum range only with accurate alignment.
3 Electrical connection
►
Disconnect power.
►
Connect the unit as follows.
3.1 Transmitter
1
3
L+
L
pin 1 = L+ (10...30 V DC)
pin 3 = L-
(pin 4 = not connected)
(pin 2 = not connected)
