IFM Ecomat 300 AC1421, Руководство по эксплуатации устройства

Страница: 200 / 365

200
ifm Device Manual SmartSPS AC14 with EtherNet/IP interface (AC1421, AC1422), Firmware 3.1.2 2015-11-30
Appendix Fieldbus EtherNet/IP
>
Diagnosis - AS-i master 1: AS-i diagnosis
12658
AS-i master 1: AS-i diagnostics:
Offset
Word no.
bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
2 - - PF19
PF22.
5
EF S0 PM IME - - - DAE PE CEIP CEAS CEMS
3 Voltage AS-i+ to AS-i- in mV
4 Voltage FE to AS-i- in mV
5 Symmetry in % (-100% ... +100%)
Legend:
Alarm Description
IME internal master error: Internal system error of an AS-i master
PM projection mode: AS-i master was set to the projection mode.
S0 slave 0 detected: New slave 0 was detected.
EF earth fault: Earth fault was detected
PF22.5 22.5V AS-i Power-Fail (classic AS-i Power) was detected.
PF19 19 AS-i Power-Fail (Power24) was detected.
CEMS Configuration Error
– Missing Slave: AS-i configuration error, one or several slaves are projected, but not
available.
CEAS Configuration Error
– Additional Slave: AS-i configuration error, one or several slaves are available, but
not projected.
CEIP Configuration Error
– Invalid Profile: AS-i configuration error, the slave profiles of one or several slaves
differ from the projected slave profiles.
PE periphery error: One or several AS-i slaves have a periphery error.
DAE duplicate address error: One or several multiple-addressing faults occurred.