Starter kit for ecomatController EC2121
24
5
A first program
Content
Device tree .............................................................................................................................................26
Connect to the device .............................................................................................................................27
Create the program ................................................................................................................................30
Transfer and test the program ................................................................................................................37
57280
When all packages have been installed, a first program for test purposes should be written.
To do so, a new project is created with [New project...] when CODESYS has been started.
ifm provides one template each for every controller. The basic elements and configurations in these
basic projects are already prepared.
Create a new project with a template:
► Select [Template project with ifm CR711S].
► Enter file name [Name: Project01].
► Select the target folder [location: …\Dokumente\CODESYS 3\Starter kit EC2121].
>
CODESYS opens the template for the controller CR711S. This is an unprepared project in which
hardware-specific settings have already been made.
