IFM DP1223, Руководство по эксплуатации

Страница: 15 / 15

15
UK
11.2 Approvals/standards
EU declarations of conformity, approvals etc. can be downloaded at:
www.ifm.com
12 Troubleshooting
LED Status Error Troubleshooting
I flashing (5
Hz)
Short circuit or
overload at the output
Check/correct connection cables and
connections at the output (→ 6) .
Power flashing (5
Hz)
Supply voltage too low. Check/correct the supply voltage (→ 6)
and (→ 11) .
off No supply voltage Check/correct the supply voltage (→ 6)
and (→ 11) .
II flashing (5
Hz)
Short circuit or
overload at the output
Check/correct connection cables and
connections at the output (→ 6) .
13 Maintenance, repair and disposal
13.1 Maintenance
The unit is maintenance-free.
13.2 Cleaning the housing surface
► Disconnect the device.
► Clean the device from dirt using a soft, chemically untreated and dry cloth.
Micro-fibre cloths without chemical additives are recommended.
13.3 Repair
The device must only be repaired by the manufacturer.
► Observe the safety instructions.
13.4 Disposal
► Dispose of the device in accordance with the national environmental
regulations.