IFM AL1340, Руководство по эксплуатации

Страница: 66 / 129

IO-Link Master with Modbus TCP Interface DataLine 4 Ports IP 65 / IP 66 / IP 67
66
>
9.3.3 Set IO-Link ports
34460
Register area for the access to the configuration of the IO-Link ports:
→
Configuration Area (
→ S.
88 )
The area contains the following data:

Operating mode of IO-Link ports

Device validation and Data storage settings

Failsafe values of outputs
► Observe the general rules for access to the Modbus registers (→
Rules for accessing the
Modbus registers (
→ S.
73 ))!
► When writing several registers at conce, ensure that the transferred parameter data has
the correct length!
Register Contents Access
9000 Port X01: Port Configuration r/w
9006 Port X02: Port Configuration r/w
9012 Port X03: Port Configuration r/w
9018 Port X04: Port Configuration r/w
r/w = read and write
In addition, the user can set the IO-Link ports of the AL1340 via the following acyclic commands:

"Set Mode":
→
Command 0x10
– Set mode
(
→ S.
104 )

"Set Validation ID / Data Storage":
→
Command 0x20
– Set validation ID / data storage
(
→ S.
106 )

"Set Fail-safe Data Pattern":
→
Command 0x30
– Set fail-safe data pattern
(
→ S.
108 )
The commands use the process mechanisms of the acyclic command channel (
→
Use acyclic
services (
→ S.
75 )).