IFM AC412S, Руководство по эксплуатации устройства

Страница: 158 / 242

SmartPLC SafeLine with PROFIBUS slave interface
158
10.3 Configuration interface: connection concepts
Content
Direct link ........................................................................................................................................... 158
Connection via Ethernet network ...................................................................................................... 158
41594
To be able to access the web interface and the programming interface of the device-internal PLC, the
configuration interface (X3) must be connected to a computer. The device supports the following
connection types:

Direct connection (
→
Direct link
(
→ S.
158 ))

Connection via an EtherNet network (
→
Connection via Ethernet network
(
→ S.
158 ))
>
10.3.1 Direct link
41458
To establish a direct connection to the device:
► Connect configuration interface X3 of the device with the Ethernet interface of the PC/laptop.
► Setup the IP parameters of the configuration interface according to the requirements (→ Address
assignment in Ethernet networks (→ S. 157 )).
> User can access the web interface and/or programming interface of the device.
>
10.3.2 Connection via Ethernet network
41578
►
Connect configuration interface (X3) via Ethernet cable with the Ethernet switch / WiFi router (
► Set IP parameter of the configuration interface (X3) and the switch / WiFi router according to the requirements
(→ Notes on IP settings (→ S. 110 )).
►
Connect PC / laptop with the Ethernet switch.
> User can accress the web interface and / or programming interface of the device.
OR:
► Connect PC / laptop / mobile device wireless with the WiFi router .
> User can accress the web interface and / or programming interface of the device.