3
UK
3 Installation
Before mounting and removing the sensor, make sure that no pressure is
applied to the system.
4 Electrical connection
The unit must be connected by a suitably qualified electrician.
The national and international regulations for the installation of electrical
equipment must be observed.
Voltage supply to EN50178, SELV, PELV.
Disconnect power before connecting the unit.
►
5 Setting / Operation
���
�
�
�
�
���
�����
������
��
���
�
�
�
�
�
�
�
�
����
locking ring
1:
setting ring (manually adjustable after unlocking)
2:
green LED: supply voltage O.K.
3:
process connection G¼ A; tightening torque 25 Nm
4:
setting marks
5:
yellow LED: Set1 value reached, output = ON
6:
sealing FPM / DIN 3869-14
7:
internal thread M5
8:
To obtain the setting accuracy: Set the ring to the minimum value, then set the
•
requested value.
ARIES TECHNOLOGY s.r.l.
