5
UK
6.2 Set the sensitivity
► Increase sensitivity:
turn the setting screw of the
potentiometer clockwise.
► Decrease sensitivity:
turn the setting screw of the
potentiometer anti-clockwise.
7 Operation
► Check whether the unit operates correctly.
> The green LED is lit when the sensor is ready for operation.
> Dark-on mode: the output is switched / the yellow LED is lit when no object is
detected.
> Light-on mode: the output is switched / the yellow LED is lit when an object is
detected.
8 Maintenance, repair, disposal
► Keep the lens of the sensor free from soiling.
► For cleaning do not use any solvents or cleaning agents which could damage
the plastic parts.
► After use dispose of the unit in an environmentally friendly way in accordance
with the applicable national regulations.
Faulty sensors must only be repaired by the manufacturer.
Technical data and further information at unter www.ifm.com
