Mobile 3D sensor
6
6 Installation
The mobile 3D sensor is operated as a system together with the illumination unit�
During installation note the following:
►
Operate sensor and illumination
unit in combination�
►
Install sensor and illumination unit
between 0 and 2�80 m apart�
> Select the matching MCI
connection cable depending on
the distance�
►
Keep the area illuminated by the
illumination unit free from any
obstructions in a close range
(up to 50 cm, see figure below)�
►
Use cables with strain relief�
Sensor
Illumination
unit
Sensor
Illumination
unit
6.1 Mounting accessories
Depending on the intended installation location and type of mounting the following
mounting accessories are available:
Description
Art. no.
Mounting set U-shaped (U-shaped fixture, adjustable for types O3Mxxx)
E3M100
Mounting set for rod mounting Ø 14 mm (clamp and bracket for type O3Mxxx)
E3M103
