CANfox
10
7.3 Interface drivers
The installation starts automatically when the device is connected to the USB
interface of the PC or notebook for the first time�
Since the device is a multi-interface, 3 drivers are required and automatically
installed one after the other�
● CANfox multi-interface driver
Enables communication with 2 gateways (CAN and RS-232) via the USB
interface
● CANfox232 (COMx)
Setting of the RS-232 communication parameters in CoDeSys
● CANfox
CAN interface driver
7.3.1 Installation with the Windows wizard
► Connect the USB plug of the device to the PC or notebook�
> Windows recognises the new USB device and shows the first dialogue box of
the installation wizard�
► Start the installation with [Next]�
► In the following dialogue box select [Install the software automatically
(Recommended)] and continue the installation with [Next]�
