CAN BusTester EC2100
10
7.2 Switch on the device
► Press [ON/OFF] for approx� 2 seconds�
> The operating system and "CANexplorer Touch" are started�
> The preinstalled measurement setup "CANopen" opens�
Splash screen
The switch-on delay of approx� 2 seconds prevents that the device is
switched on unintentionally� The entire boot process until display of the
above-shown splash screen takes approx� 30 seconds�
7.3 Switch off the device
7.3.1 Switch off via the ON/OFF key
When it has been ensured that no data recording is interrupted, switch off the
device using the ON/OFF key�
► Press [ON/OFF] for approx� 2 seconds�
7.3.2 Switch off via softkey
► Select [Home] in the main menu on the left (→ 8.1.1 Main menu).
► Select the switch-off symbol in the area of "System functions"
This approach prevents a possible loss of data�
The running software and the operating system are shut down regularly�
The device is switched off�
